Class LdapManager


  • public class LdapManager
    extends Object
    Centralized administration of LDAP connections. The getInstance() method should be used to get an instace. The following properties configure this manager:
    • ldap.host
    • ldap.port
    • ldap.baseDN
    • ldap.alternateBaseDN
    • ldap.adminDN
    • ldap.adminPassword
    • ldap.usernameField -- default value is "uid".
    • ldap.usernameSuffix -- default value is "".
    • ldap.nameField -- default value is "cn".
    • ldap.emailField -- default value is "mail".
    • ldap.searchFilter -- the filter used to load the list of users. When defined, it will be used with the default filter, which is "([usernameField]={0})" where [usernameField] is the value of ldap.usernameField.
    • ldap.groupNameField
    • ldap.groupMemberField
    • ldap.groupDescriptionField
    • ldap.posixMode
    • ldap.groupSearchFilter
    • ldap.flattenNestedGroups
    • ldap.debugEnabled
    • ldap.sslEnabled
    • ldap.startTlsEnabled
    • ldap.autoFollowReferrals
    • ldap.autoFollowAliasReferrals
    • ldap.initialContextFactory -- if this value is not specified, "com.sun.jndi.ldap.LdapCtxFactory" will be used.
    • ldap.connectionPoolEnabled -- true if an LDAP connection pool should be used. False if not set.
    • ldap.findUsersFromGroupsEnabled
    • -- If true then Openfire users will be identified from the members of Openfire groups instead of from the list of all users in LDAP. This option is only useful if you wish to restrict the users of Openfire to those in certain groups. Normally this is done by applying an appropriate ldap.searchFilter, but there are a number of reasons why you may wish to enable this option instead:
      • If group members cannot be identified by the attributes of the user in LDAP (typically the memberOf attribute) then users cannot be filtered using ldap.searchFilter
      • If the number of Openfire users is small compared to the total number of users in LDAP then it may be more performant to identify these users from the groups to which they belong instead of applying an ldap.searchFilter. Note that if this is not the case, enabling this option may significantly decrease performance.
      In any case, an appropriate ldap.groupSearchFilter should be applied to prevent LDAP users belonging to any group being selected as Openfire users. (default value: false)
    Author:
    Matt Tucker
    • Constructor Detail

      • LdapManager

        public LdapManager​(Map<String,​String> properties)
        Constructs a new LdapManager instance. Typically, getInstance() should be called instead of this method. LdapManager instances should only be created directly for testing purposes.
        Parameters:
        properties - the Map that contains properties used by the LDAP manager, such as LDAP host and base DN.
    • Method Detail

      • setInstance

        public static void setInstance​(LdapManager instance)
        Exposed for test use only
      • getInstance

        public static LdapManager getInstance()
        Provides singleton access to an instance of the LdapManager class.
        Returns:
        an LdapManager instance.
      • splitFilter

        public static List<String> splitFilter​(String input)
        Splits a string formatted as an LDAP filter, such as (&(part-a)(part-b)(part-c)), in separate parts. When the provided input cannot be parsed as an LDAP filter, the returned collection contains one element: the original input.
        Parameters:
        input - The value to be split.
        Returns:
        The splitted value.
      • joinFilter

        public static String joinFilter​(char operator,
                                        List<String> parts)
        Joins individual strings into one, formatted as an LDAP filter, such as (&(part-a)(part-b)(part-c)).
        Parameters:
        operator - the second character of the resulting string.
        parts - The parts to be joined into one string.
        Returns:
        The joined string value.
      • parseAsLdapNameOrLog

        public LdapName parseAsLdapNameOrLog​(String value)
        Attempts to parse a string value as an LdapName. This method returns null (and logs an error) if the value was non-null and non-empty and the parsing fails. This method returns null if the provided value was null or empty.
        Parameters:
        value - The value to be parsed (can be null or empty).
        Returns:
        The parsed value, possibly null.
      • getRelativeDNFromResult

        public static Rdn[] getRelativeDNFromResult​(SearchResult answer)
                                             throws NamingException
        Returns a RDN from the search result answer. The return value consists of one or more Rdn instances, that, when combined, are relative to the base DN that was used for the search.
        Parameters:
        answer - The result of the search (cannot be null).
        Returns:
        A relative distinguished name from the answer.
        Throws:
        NamingException - When the search result value cannot be used to form a valid RDN value.
      • getContext

        public LdapContext getContext()
                               throws NamingException
        Returns a DirContext for the LDAP server that can be used to perform lookups and searches using the default base DN. The alternate DN will be used in case there is a NamingException using base DN. The context uses the admin login that is defined by adminDN and adminPassword.
        Returns:
        a connection to the LDAP server.
        Throws:
        NamingException - if there is an error making the LDAP connection.
      • getContext

        public LdapContext getContext​(LdapName baseDN)
                               throws NamingException
        Returns a DirContext for the LDAP server that can be used to perform lookups and searches using the specified base DN. The context uses the admin login that is defined by adminDN and adminPassword.
        Parameters:
        baseDN - the base DN to use for the context.
        Returns:
        a connection to the LDAP server.
        Throws:
        NamingException - if there is an error making the LDAP connection.
      • checkAuthentication

        public boolean checkAuthentication​(Rdn[] userRDN,
                                           String password)
        Returns true if the user is able to successfully authenticate against the LDAP server. The "simple" authentication protocol is used.
        Parameters:
        userRDN - the user's rdn to authenticate (relative to baseDN).
        password - the user's password.
        Returns:
        true if the user successfully authenticates.
      • isFindUsersFromGroupsEnabled

        public boolean isFindUsersFromGroupsEnabled()
      • createNewAbsolute

        public static LdapName createNewAbsolute​(LdapName base,
                                                 Rdn[] relative)
      • findUserRDN

        public Rdn[] findUserRDN​(String username)
                          throws Exception
        Finds a user's RDN using their username. Normally, this search will be performed using the field "uid", but this can be changed by setting the usernameField property.

        Searches are performed over all subtrees relative to the baseDN. If the search fails in the baseDN then another search will be performed in the alternateBaseDN. For example, if the baseDN is "o=jivesoftware, o=com" and we do a search for "mtucker", then we might find a userDN of "uid=mtucker,ou=People". This kind of searching is a good thing since it doesn't make the assumption that all user records are stored in a flat structure. However, it does add the requirement that "uid" field (or the other field specified) must be unique over the entire subtree from the baseDN. For example, it's entirely possible to create two dn's in your LDAP directory with the same uid: "uid=mtucker,ou=People" and "uid=mtucker,ou=Administrators". In such a case, it's not possible to uniquely identify a user, so this method will throw an error.

        The dn that's returned is relative to the default baseDN.

        Parameters:
        username - the username to lookup the dn for.
        Returns:
        the dn associated with username.
        Throws:
        Exception - if the search for the dn fails.
      • findUserRDN

        public Rdn[] findUserRDN​(String username,
                                 LdapName baseDN)
                          throws Exception
        Finds a user's RDN using their username in the specified baseDN. Normally, this search will be performed using the field "uid", but this can be changed by setting the usernameField property. Searches are performed over all sub-trees relative to the baseDN unless sub-tree searching has been disabled. For example, if the baseDN is "o=jivesoftware, o=com" and we do a search for "mtucker", then we might find a userDN of "uid=mtucker,ou=People". This kind of searching is a good thing since it doesn't make the assumption that all user records are stored in a flat structure. However, it does add the requirement that "uid" field (or the other field specified) must be unique over the entire subtree from the baseDN. For example, it's entirely possible to create two dn's in your LDAP directory with the same uid: "uid=mtucker,ou=People" and "uid=mtucker,ou=Administrators". In such a case, it's not possible to uniquely identify a user, so this method will throw an error.

        The RDN that's returned is relative to the baseDN.

        Parameters:
        username - the username to lookup the dn for.
        baseDN - the base DN to use for this search.
        Returns:
        the RDN associated with username.
        Throws:
        Exception - if the search for the RDN fails.
        See Also:
        to search using the default baseDN and alternateBaseDN.
      • findGroupRDN

        public Rdn[] findGroupRDN​(String groupname)
                           throws Exception
        Finds a groups's RDN using it's group name. Normally, this search will be performed using the field "cn", but this can be changed by setting the groupNameField property.

        Searches are performed over all subtrees relative to the baseDN. If the search fails in the baseDN then another search will be performed in the alternateBaseDN. For example, if the baseDN is "o=jivesoftware, o=com" and we do a search for "managers", then we might find a groupDN of "uid=managers,ou=Groups". This kind of searching is a good thing since it doesn't make the assumption that all user records are stored in a flat structure. However, it does add the requirement that "cn" field (or the other field specified) must be unique over the entire subtree from the baseDN. For example, it's entirely possible to create two dn's in your LDAP directory with the same cn: "cn=managers,ou=Financial" and "cn=managers,ou=Engineers". In such a case, it's not possible to uniquely identify a group, so this method will throw an error.

        The RDN that's returned is relative to the default baseDN.

        Parameters:
        groupname - the groupname to lookup the RDN for.
        Returns:
        the RDN associated with groupname.
        Throws:
        Exception - if the search for the RDN fails.
      • findGroupRDN

        public Rdn[] findGroupRDN​(String groupname,
                                  LdapName baseDN)
                           throws Exception
        Finds a groups's dn using it's group name. Normally, this search will be performed using the field "cn", but this can be changed by setting the groupNameField property.

        Searches are performed over all subtrees relative to the baseDN. If the search fails in the baseDN then another search will be performed in the alternateBaseDN. For example, if the baseDN is "o=jivesoftware, o=com" and we do a search for "managers", then we might find a groupDN of "uid=managers,ou=Groups". This kind of searching is a good thing since it doesn't make the assumption that all user records are stored in a flat structure. However, it does add the requirement that "cn" field (or the other field specified) must be unique over the entire subtree from the baseDN. For example, it's entirely possible to create two dn's in your LDAP directory with the same cn: "cn=managers,ou=Financial" and "cn=managers,ou=Engineers". In such a case, it's not possible to uniquely identify a group, so this method will throw an error.

        The dn that's returned is relative to the default baseDN.

        Parameters:
        groupname - the groupname to lookup the dn for.
        baseDN - the base DN to use for this search.
        Returns:
        the dn associated with groupname.
        Throws:
        Exception - if the search for the dn fails.
        See Also:
        to search using the default baseDN and alternateBaseDN.
      • isGroupDN

        public boolean isGroupDN​(LdapName dn)
        Check if the given DN matches the group search filter
        Parameters:
        dn - the absolute DN of the node to check
        Returns:
        true if the given DN is matching the group filter. false oterwise.
        Throws:
        NamingException - if the search for the dn fails.
      • getHosts

        public Collection<String> getHosts()
        Returns the LDAP servers hosts; e.g. localhost or machine.example.com, etc. This value is stored as the Jive Property ldap.host.
        Returns:
        the LDAP server host name.
      • setHosts

        public void setHosts​(Collection<String> hosts)
        Sets the list of LDAP servers host; e.g., localhost or machine.example.com, etc. This value is store as the Jive Property ldap.host using a comma as a delimiter for each host.

        Note that all LDAP servers have to share the same configuration.

        Parameters:
        hosts - the LDAP servers host names.
      • getPort

        public int getPort()
        Returns the LDAP server port number. The default is 389. This value is stored as the Jive Property ldap.port.
        Returns:
        the LDAP server port number.
      • setPort

        public void setPort​(int port)
        Sets the LDAP server port number. The default is 389. This value is stored as the Jive property ldap.port.
        Parameters:
        port - the LDAP server port number.
      • isDebugEnabled

        public boolean isDebugEnabled()
        Returns true if LDAP connection debugging is turned on. When on, trace information about BER buffers sent and received by the LDAP provider is written to System.out. Debugging is turned off by default.
        Returns:
        true if LDAP debugging is turned on.
      • setDebugEnabled

        public void setDebugEnabled​(boolean debugEnabled)
        Sets whether LDAP connection debugging is turned on. When on, trace information about BER buffers sent and received by the LDAP provider is written to System.out. Debugging is turned off by default.
        Parameters:
        debugEnabled - true if debugging should be turned on.
      • isSslEnabled

        public boolean isSslEnabled()
        Returns true if LDAP connection is via SSL or not. SSL is turned off by default.
        Returns:
        true if SSL connections are enabled or not.
      • setSslEnabled

        public void setSslEnabled​(boolean sslEnabled)
        Sets whether the connection to the LDAP server should be made via ssl or not.
        Parameters:
        sslEnabled - true if ssl should be enabled, false otherwise.
      • isStartTlsEnabled

        public boolean isStartTlsEnabled()
        Returns true if LDAP connection is via START or not. TLS is turned off by default.
        Returns:
        true if StartTLS connections are enabled or not.
      • setStartTlsEnabled

        public void setStartTlsEnabled​(boolean startTlsEnabled)
        Sets whether the connection to the LDAP server should be made via StartTLS or not.
        Parameters:
        startTlsEnabled - true if StartTLS should be used, false otherwise.
      • getUsernameField

        public String getUsernameField()
        Returns the LDAP field name that the username lookup will be performed on. By default this is "uid".
        Returns:
        the LDAP field that the username lookup will be performed on.
      • getUsernameSuffix

        public String getUsernameSuffix()
        Returns the suffix appended to the username when LDAP lookups are performed. By default this is "".
        Returns:
        the suffix appened to usernames when LDAP lookups are performed.
      • setUsernameField

        public void setUsernameField​(String usernameField)
        Sets the LDAP field name that the username lookup will be performed on. By default this is "uid".
        Parameters:
        usernameField - the LDAP field that the username lookup will be performed on.
      • setUsernameSuffix

        public void setUsernameSuffix​(String usernameSuffix)
        Set the suffix appended to the username whenever LDAP lookups are performed.
        Parameters:
        usernameSuffix - the String to append to usernames for lookups
      • getNameField

        public LdapUserTester.PropertyMapping getNameField()
        Returns the LDAP field name that the user's name is stored in. By default this is "cn". Another common value is "displayName".
        Returns:
        the LDAP field that that corresponds to the user's name.
      • setNameField

        public void setNameField​(LdapUserTester.PropertyMapping nameField)
        Sets the LDAP field name that the user's name is stored in. By default this is "cn". Another common value is "displayName".
        Parameters:
        nameField - the LDAP field that that corresponds to the user's name.
      • getEmailField

        public String getEmailField()
        Returns the LDAP field name that the user's email address is stored in. By default this is "mail".
        Returns:
        the LDAP field that that corresponds to the user's email address.
      • setEmailField

        public void setEmailField​(String emailField)
        Sets the LDAP field name that the user's email address is stored in. By default this is "mail".
        Parameters:
        emailField - the LDAP field that that corresponds to the user's email address.
      • getBaseDN

        public LdapName getBaseDN()
        Returns the starting DN that searches for users will performed with. Searches will performed on the entire sub-tree under the base DN.
        Returns:
        the starting DN used for performing searches.
      • setBaseDN

        public void setBaseDN​(LdapName baseDN)
        Sets the starting DN that searches for users will performed with. Searches will performed on the entire sub-tree under the base DN.
        Parameters:
        baseDN - the starting DN used for performing searches.
      • getAlternateBaseDN

        public LdapName getAlternateBaseDN()
        Returns the alternate starting DN that searches for users will performed with. Searches will performed on the entire sub-tree under the alternate base DN after they are performed on the main base DN.
        Returns:
        the alternate starting DN used for performing searches. If no alternate DN is set, this method will return null.
      • setAlternateBaseDN

        public void setAlternateBaseDN​(LdapName alternateBaseDN)
        Sets the alternate starting DN that searches for users will performed with. Searches will performed on the entire sub-tree under the alternate base DN after they are performed on the main base dn.
        Parameters:
        alternateBaseDN - the alternate starting DN used for performing searches.
      • getUsersBaseDN

        public LdapName getUsersBaseDN​(String username)
        Returns the BaseDN for the given username.
        Parameters:
        username - username to return its base DN.
        Returns:
        the BaseDN for the given username. If no baseDN is found, this method will return null.
      • getGroupsBaseDN

        public LdapName getGroupsBaseDN​(String groupname)
        Returns the BaseDN for the given groupname.
        Parameters:
        groupname - groupname to return its base DN.
        Returns:
        the BaseDN for the given groupname. If no baseDN is found, this method will return null.
      • getAdminDN

        public String getAdminDN()
        Returns the starting admin DN that searches for admins will performed with. Searches will performed on the entire sub-tree under the admin DN.
        Returns:
        the starting DN used for performing searches.
      • setAdminDN

        public void setAdminDN​(String adminDN)
        Sets the starting admin DN that searches for admins will performed with. Searches will performed on the entire sub-tree under the admins DN.
        Parameters:
        adminDN - the starting DN used for performing admin searches.
      • getAdminPassword

        public String getAdminPassword()
        Returns the starting admin DN that searches for admins will performed with. Searches will performed on the entire sub-tree under the admin DN.
        Returns:
        the starting DN used for performing searches.
      • setAdminPassword

        public void setAdminPassword​(String adminPassword)
        Sets the admin password for the LDAP server we're connecting to.
        Parameters:
        adminPassword - the admin password for the LDAP server we're connecting to.
      • setConnectionPoolEnabled

        public void setConnectionPoolEnabled​(boolean connectionPoolEnabled)
        Sets whether an LDAP connection pool should be used or not.
        Parameters:
        connectionPoolEnabled - true if an LDAP connection pool should be used.
      • isConnectionPoolEnabled

        public boolean isConnectionPoolEnabled()
        Returns whether an LDAP connection pool should be used or not.
        Returns:
        true if an LDAP connection pool should be used.
      • getSearchFilter

        public String getSearchFilter()
        Returns the filter used for searching the directory for users, which includes the default filter (username field search) plus any custom-defined search filter.
        Returns:
        the search filter.
      • setSearchFilter

        public void setSearchFilter​(String searchFilter)
        Sets the search filter appended to the default filter when searching for users.
        Parameters:
        searchFilter - the search filter appended to the default filter when searching for users.
      • isSubTreeSearch

        public boolean isSubTreeSearch()
        Returns true if the entire tree under the base DN will be searched (recursive search) when doing LDAP queries (finding users, groups, etc). When false, only a single level under the base DN will be searched. The default is true which is the best option for most LDAP setups. In only a few cases will the directory be setup in such a way that it's better to do single level searching.
        Returns:
        true if the entire tree under the base DN will be searched.
      • setSubTreeSearch

        public void setSubTreeSearch​(boolean subTreeSearch)
        Sets whether the entire tree under the base DN will be searched (recursive search) when doing LDAP queries (finding users, groups, etc). When false, only a single level under the base DN will be searched. The default is true which is the best option for most LDAP setups. In only a few cases will the directory be setup in such a way that it's better to do single level searching.
        Parameters:
        subTreeSearch - true if the entire tree under the base DN will be searched.
      • isFollowReferralsEnabled

        public boolean isFollowReferralsEnabled()
        Returns true if LDAP referrals will automatically be followed when found.
        Returns:
        true if LDAP referrals are automatically followed.
      • setFollowReferralsEnabled

        public void setFollowReferralsEnabled​(boolean followReferrals)
        Sets whether LDAP referrals should be automatically followed.
        Parameters:
        followReferrals - true if LDAP referrals should be automatically followed.
      • isFollowAliasReferralsEnabled

        public boolean isFollowAliasReferralsEnabled()
        Returns true if LDAP alias referrals will automatically be followed when found.
        Returns:
        true if LDAP alias referrals are automatically followed.
      • setFollowAliasReferralsEnabled

        public void setFollowAliasReferralsEnabled​(boolean followAliasReferrals)
        Sets whether LDAP alias referrals should be automatically followed.
        Parameters:
        followAliasReferrals - true if LDAP alias referrals should be automatically followed.
      • getGroupNameField

        public String getGroupNameField()
        Returns the field name used for groups. Value of groupNameField defaults to "cn".
        Returns:
        the field used for groups.
      • setGroupNameField

        public void setGroupNameField​(String groupNameField)
        Sets the field name used for groups.
        Parameters:
        groupNameField - the field used for groups.
      • getGroupMemberField

        public String getGroupMemberField()
        Return the field used to list members within a group. Value of groupMemberField defaults to "member".
        Returns:
        the field used to list members within a group.
      • setGroupMemberField

        public void setGroupMemberField​(String groupMemberField)
        Sets the field used to list members within a group. Value of groupMemberField defaults to "member".
        Parameters:
        groupMemberField - the field used to list members within a group.
      • getGroupDescriptionField

        public String getGroupDescriptionField()
        Return the field used to describe a group. Value of groupDescriptionField defaults to "description".
        Returns:
        the field used to describe a group.
      • setGroupDescriptionField

        public void setGroupDescriptionField​(String groupDescriptionField)
        Sets the field used to describe a group. Value of groupDescriptionField defaults to "description".
        Parameters:
        groupDescriptionField - the field used to describe a group.
      • isPosixMode

        public boolean isPosixMode()
        Return true if the LDAP server is operating in Posix mode. By default false is returned. When in Posix mode, users are stored within a group by their username alone. When not enabled, users are stored in a group using their entire DN.
        Returns:
        true if posix mode is being used by the LDAP server.
      • setPosixMode

        public void setPosixMode​(boolean posixMode)
        Sets whether the LDAP server is operating in Posix mode. When in Posix mode, users are stored within a group by their username alone. When not enabled, users are stored in a group using their entire DN.
        Parameters:
        posixMode - true if posix mode is being used by the LDAP server.
      • getGroupSearchFilter

        public String getGroupSearchFilter()
        Returns the filter used for searching the directory for groups, which includes the default filter plus any custom-defined search filter.
        Returns:
        the search filter when searching for groups.
      • isFlattenNestedGroups

        public boolean isFlattenNestedGroups()
        Returns true if nested / complex / hierarchic groups should be should be flattened.

        This means: if group A is member of group B, the members of group A will also be members of group B

      • setFlattenNestedGroups

        public void setFlattenNestedGroups​(boolean flattenNestedGroups)
        Set whether nested / complex / hierarchic groups should be should be flattened.
        See Also:
        isFlattenNestedGroups()
      • setGroupSearchFilter

        public void setGroupSearchFilter​(String groupSearchFilter)
        Sets the search filter appended to the default filter when searching for groups.
        Parameters:
        groupSearchFilter - the search filter appended to the default filter when searching for groups.
      • retrieveList

        public List<String> retrieveList​(String attribute,
                                         String searchFilter,
                                         int startIndex,
                                         int numResults,
                                         String suffixToTrim)
        Generic routine for retrieving a list of results from the LDAP server. It's meant to be very flexible so that just about any query for a list of results can make use of it without having to reimplement their own calls to LDAP. This routine also accounts for sorting settings, paging settings, any other global settings, and alternate DNs. The passed in filter string needs to be pre-prepared! In other words, nothing will be changed in the string before it is used as a string.
        Parameters:
        attribute - LDAP attribute to be pulled from each result and placed in the return results. Typically pulled from this manager.
        searchFilter - Filter to use to perform the search. Typically pulled from this manager.
        startIndex - Number/index of first result to include in results. (-1 for no limit)
        numResults - Number of results to include. (-1 for no limit)
        suffixToTrim - An arbitrary string to trim from the end of every attribute returned. null to disable.
        Returns:
        A simple list of strings (that should be sorted) of the results.
      • retrieveList

        public List<String> retrieveList​(String attribute,
                                         String searchFilter,
                                         int startIndex,
                                         int numResults,
                                         String suffixToTrim,
                                         boolean escapeJIDs)
        Generic routine for retrieving a list of results from the LDAP server. It's meant to be very flexible so that just about any query for a list of results can make use of it without having to reimplement their own calls to LDAP. This routine also accounts for sorting settings, paging settings, any other global settings, and alternate DNs. The passed in filter string needs to be pre-prepared! In other words, nothing will be changed in the string before it is used as a string.
        Parameters:
        attribute - LDAP attribute to be pulled from each result and placed in the return results. Typically pulled from this manager.
        searchFilter - Filter to use to perform the search. Typically pulled from this manager.
        startIndex - Number/index of first result to include in results. (-1 for no limit)
        numResults - Number of results to include. (-1 for no limit)
        suffixToTrim - An arbitrary string to trim from the end of every attribute returned. null to disable.
        escapeJIDs - Use JID-escaping for returned results (e.g. usernames)
        Returns:
        A simple list of strings (that should be sorted) of the results.
      • retrieveSingle

        public String retrieveSingle​(String attribute,
                                     String searchFilter,
                                     boolean failOnMultipleResults)
        Generic routine for retrieving a single element from the LDAP server. It's meant to be very flexible so that just about any query for a single results can make use of it without having to reimplement their own calls to LDAP.

        The passed in filter string needs to be pre-prepared! In other words, nothing will be changed in the string before it is used as a string.

        Parameters:
        attribute - LDAP attribute to be pulled from each result and placed in the return results. Typically pulled from this manager. Null means the the absolute DN is returned.
        searchFilter - Filter to use to perform the search. Typically pulled from this manager.
        failOnMultipleResults - It true, an IllegalStateException will be thrown, if the search result is not unique. If false, just the first result will be returned.
        Returns:
        A single string.
      • retrieveSingle

        public String retrieveSingle​(String attribute,
                                     String searchFilter,
                                     boolean failOnMultipleResults,
                                     LdapName baseDN)
        Generic routine for retrieving a single element from the LDAP server. It's meant to be very flexible so that just about any query for a single results can make use of it without having to reimplement their own calls to LDAP.

        The passed in filter string needs to be pre-prepared! In other words, nothing will be changed in the string before it is used as a string.

        Parameters:
        attribute - LDAP attribute to be pulled from each result and placed in the return results. Typically pulled from this manager. Null means the the absolute DN is returned.
        searchFilter - Filter to use to perform the search. Typically pulled from this manager.
        failOnMultipleResults - It true, an IllegalStateException will be thrown, if the search result is not unique. If false, just the first result will be returned.
        baseDN - DN where to start the search. Typically getBaseDN() or getAlternateBaseDN().
        Returns:
        A single string.
      • retrieveAttributeOf

        public List<String> retrieveAttributeOf​(String attributeName,
                                                LdapName dn)
                                         throws NamingException
        Reads the attribute values of an entry with the given DN.
        Parameters:
        attributeName - LDAP attribute to be read.
        dn - DN of the entry.
        Returns:
        A list with the values of the attribute.
        Throws:
        NamingException
      • retrieveListCount

        public Integer retrieveListCount​(String attribute,
                                         String searchFilter)
        Generic routine for retrieving the number of available results from the LDAP server that match the passed search filter. This routine also accounts for paging settings and alternate DNs. The passed in filter string needs to be pre-prepared! In other words, nothing will be changed in the string before it is used as a string.
        Parameters:
        attribute - LDAP attribute to be pulled from each result and used in the query. Typically pulled from this manager.
        searchFilter - Filter to use to perform the search. Typically pulled from this manager.
        Returns:
        The number of entries that match the filter.
      • sanitizeSearchFilter

        public static String sanitizeSearchFilter​(String value)
        Escapes any special chars (RFC 4515) from a string representing a search filter assertion value.
        Parameters:
        value - The input string.
        Returns:
        A assertion value string ready for insertion into a search filter string.
      • escapeForJNDI

        public static LdapName escapeForJNDI​(Rdn... rdn)
        Returns a JNDI Name for an array of RDNs that is suitable to use to access LDAP through JNDI. This method applies JDNI-suitable escaping to each RDN
        When using the JNDI to access an LDAP service, you should be aware that the forward slash character ("/") in a string name has special meaning to the JNDI. If the LDAP entry's name contains this character, then you need to escape it (using the backslash character ("\")). For example, an LDAP entry with the name "cn=O/R" must be presented as the string "cn=O\\/R" to the JNDI context methods.
        Parameters:
        rdn - The names to escape (cannot be null).
        Returns:
        A JNDI name representation of the values (never null).
        See Also:
        JNDI, Handling Special Characters
      • sanitizeSearchFilter

        public static String sanitizeSearchFilter​(String value,
                                                  boolean acceptWildcard)
        Escapes any special chars (RFC 4514/4515) from a string representing a search filter assertion value, with the exception of the '*' wildcard sign
        Parameters:
        value - The input string.
        acceptWildcard - true to accept wildcards, otherwise false
        Returns:
        A assertion value string ready for insertion into a search filter string.