ConnectionConfiguration.java
/**
*
* Copyright 2003-2007 Jive Software, 2017-2020 Florian Schmaus.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.jivesoftware.smack;
import java.io.ByteArrayInputStream;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
import java.lang.reflect.Constructor;
import java.lang.reflect.InvocationTargetException;
import java.net.InetAddress;
import java.net.UnknownHostException;
import java.nio.charset.StandardCharsets;
import java.security.KeyManagementException;
import java.security.KeyStore;
import java.security.KeyStoreException;
import java.security.NoSuchAlgorithmException;
import java.security.NoSuchProviderException;
import java.security.Provider;
import java.security.Security;
import java.security.UnrecoverableKeyException;
import java.security.cert.CertificateException;
import java.util.Arrays;
import java.util.Collection;
import java.util.Collections;
import java.util.HashSet;
import java.util.Locale;
import java.util.Set;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.net.SocketFactory;
import javax.net.ssl.HostnameVerifier;
import javax.net.ssl.KeyManager;
import javax.net.ssl.KeyManagerFactory;
import javax.net.ssl.SSLContext;
import javax.net.ssl.TrustManager;
import javax.net.ssl.X509TrustManager;
import javax.security.auth.callback.Callback;
import javax.security.auth.callback.CallbackHandler;
import javax.security.auth.callback.PasswordCallback;
import javax.security.auth.callback.UnsupportedCallbackException;
import org.jivesoftware.smack.datatypes.UInt16;
import org.jivesoftware.smack.debugger.SmackDebuggerFactory;
import org.jivesoftware.smack.internal.SmackTlsContext;
import org.jivesoftware.smack.packet.id.StandardStanzaIdSource;
import org.jivesoftware.smack.packet.id.StanzaIdSource;
import org.jivesoftware.smack.packet.id.StanzaIdSourceFactory;
import org.jivesoftware.smack.proxy.ProxyInfo;
import org.jivesoftware.smack.sasl.SASLMechanism;
import org.jivesoftware.smack.sasl.core.SASLAnonymous;
import org.jivesoftware.smack.util.CloseableUtil;
import org.jivesoftware.smack.util.CollectionUtil;
import org.jivesoftware.smack.util.DNSUtil;
import org.jivesoftware.smack.util.Objects;
import org.jivesoftware.smack.util.SslContextFactory;
import org.jivesoftware.smack.util.StringUtils;
import org.jivesoftware.smack.util.TLSUtils;
import org.jivesoftware.smack.util.dns.SmackDaneProvider;
import org.jivesoftware.smack.util.dns.SmackDaneVerifier;
import org.jxmpp.jid.DomainBareJid;
import org.jxmpp.jid.EntityBareJid;
import org.jxmpp.jid.impl.JidCreate;
import org.jxmpp.jid.parts.Resourcepart;
import org.jxmpp.stringprep.XmppStringprepException;
import org.minidns.dnsname.DnsName;
import org.minidns.dnsname.InvalidDnsNameException;
import org.minidns.util.InetAddressUtil;
/**
* The connection configuration used for XMPP client-to-server connections. A well configured XMPP service will
* typically only require you to provide two parameters: The XMPP address, also known as the JID, of the user and the
* password. All other configuration parameters could ideally be determined automatically by Smack. Hence it is often
* enough to call {@link Builder#setXmppAddressAndPassword(CharSequence, String)}.
* <p>
* Technically there are typically at least two parameters required: Some kind of credentials for authentication. And
* the XMPP service domain. The credentials often consists of a username and password use for the SASL authentication.
* But there are also other authentication mechanisms, like client side certificates, which do not require a particular
* username and password.
* </p>
* <p>
* There are some misconceptions about XMPP client-to-server parameters: The first is that the username used for
* authentication will be equal to the localpart of the bound XMPP address after authentication. While this is usually
* true, it is not required. Technically the username used for authentication and the resulting XMPP address are
* completely independent from each other. The second common misconception steers from the terms "XMPP host" and "XMPP
* service domain": An XMPP service host is a system which hosts one or multiple XMPP domains. The "XMPP service domain"
* will be usually the domainpart of the bound JID. This domain is used to verify the remote endpoint, typically using
* TLS. This third misconception is that the XMPP service domain is required to become the domainpart of the bound JID.
* Again, while this is very common to be true, it is not strictly required.
* </p>
*
* @author Gaston Dombiak
* @author Florian Schmaus
*/
public abstract class ConnectionConfiguration {
static {
Smack.ensureInitialized();
}
private static final Logger LOGGER = Logger.getLogger(ConnectionConfiguration.class.getName());
/**
* The XMPP domain of the XMPP Service. Usually servers use the same service name as the name
* of the server. However, there are some servers like google where host would be
* talk.google.com and the serviceName would be gmail.com.
*/
protected final DomainBareJid xmppServiceDomain;
protected final DnsName xmppServiceDomainDnsName;
protected final InetAddress hostAddress;
protected final DnsName host;
protected final UInt16 port;
/**
* Used to get information from the user
*/
private final CallbackHandler callbackHandler;
private final SmackDebuggerFactory debuggerFactory;
// Holds the socket factory that is used to generate the socket in the connection
private final SocketFactory socketFactory;
private final CharSequence username;
private final String password;
private final Resourcepart resource;
private final Locale language;
/**
* The optional SASL authorization identity (see RFC 6120 § 6.3.8).
*/
private final EntityBareJid authzid;
/**
* Initial presence as of RFC 6121 § 4.2
* @see <a href="http://xmpp.org/rfcs/rfc6121.html#presence-initial">RFC 6121 § 4.2 Initial Presence</a>
*/
private final boolean sendPresence;
private final SecurityMode securityMode;
final SmackTlsContext smackTlsContext;
private final DnssecMode dnssecMode;
/**
*
*/
private final String[] enabledSSLProtocols;
/**
*
*/
private final String[] enabledSSLCiphers;
private final HostnameVerifier hostnameVerifier;
// Holds the proxy information (such as proxyhost, proxyport, username, password etc)
protected final ProxyInfo proxy;
protected final boolean allowNullOrEmptyUsername;
private final Set<String> enabledSaslMechanisms;
private final boolean compressionEnabled;
private final StanzaIdSourceFactory stanzaIdSourceFactory;
protected ConnectionConfiguration(Builder<?, ?> builder) {
try {
smackTlsContext = getSmackTlsContext(builder.dnssecMode, builder.sslContextFactory,
builder.customX509TrustManager, builder.keystoreType, builder.keystorePath,
builder.callbackHandler, builder.pkcs11Library);
} catch (UnrecoverableKeyException | KeyManagementException | NoSuchAlgorithmException | CertificateException
| KeyStoreException | NoSuchProviderException | IOException | NoSuchMethodException
| SecurityException | ClassNotFoundException | InstantiationException | IllegalAccessException
| IllegalArgumentException | InvocationTargetException | UnsupportedCallbackException e) {
throw new IllegalArgumentException(e);
}
authzid = builder.authzid;
username = builder.username;
password = builder.password;
callbackHandler = builder.callbackHandler;
// Resource can be null, this means that the server must provide one
resource = builder.resource;
language = builder.language;
xmppServiceDomain = builder.xmppServiceDomain;
if (xmppServiceDomain == null) {
throw new IllegalArgumentException("Must define the XMPP domain");
}
DnsName xmppServiceDomainDnsName;
try {
xmppServiceDomainDnsName = DnsName.from(xmppServiceDomain);
} catch (InvalidDnsNameException e) {
LOGGER.log(Level.INFO,
"Could not transform XMPP service domain '" + xmppServiceDomain
+ "' to a DNS name. TLS X.509 certificate validiation may not be possible.",
e);
xmppServiceDomainDnsName = null;
}
this.xmppServiceDomainDnsName = xmppServiceDomainDnsName;
hostAddress = builder.hostAddress;
host = builder.host;
port = builder.port;
proxy = builder.proxy;
socketFactory = builder.socketFactory;
dnssecMode = builder.dnssecMode;
securityMode = builder.securityMode;
enabledSSLProtocols = builder.enabledSSLProtocols;
enabledSSLCiphers = builder.enabledSSLCiphers;
hostnameVerifier = builder.hostnameVerifier;
sendPresence = builder.sendPresence;
debuggerFactory = builder.debuggerFactory;
allowNullOrEmptyUsername = builder.allowEmptyOrNullUsername;
enabledSaslMechanisms = builder.enabledSaslMechanisms;
compressionEnabled = builder.compressionEnabled;
stanzaIdSourceFactory = builder.stanzaIdSourceFactory;
// If the enabledSaslmechanisms are set, then they must not be empty
assert enabledSaslMechanisms == null || !enabledSaslMechanisms.isEmpty();
}
private static SmackTlsContext getSmackTlsContext(DnssecMode dnssecMode, SslContextFactory sslContextFactory,
X509TrustManager trustManager, String keystoreType, String keystorePath,
CallbackHandler callbackHandler, String pkcs11Library) throws NoSuchAlgorithmException,
CertificateException, IOException, KeyStoreException, NoSuchProviderException,
UnrecoverableKeyException, KeyManagementException, UnsupportedCallbackException,
NoSuchMethodException, SecurityException, ClassNotFoundException, InstantiationException,
IllegalAccessException, IllegalArgumentException, InvocationTargetException {
final SSLContext context;
if (sslContextFactory != null) {
context = sslContextFactory.createSslContext();
} else {
// If the user didn't specify a SslContextFactory, use the default one
context = SSLContext.getInstance("TLS");
}
KeyStore ks = null;
PasswordCallback pcb = null;
KeyManager[] kms = null;
if ("PKCS11".equals(keystoreType)) {
Constructor<?> c = Class.forName("sun.security.pkcs11.SunPKCS11").getConstructor(InputStream.class);
String pkcs11Config = "name = SmartCard\nlibrary = " + pkcs11Library;
ByteArrayInputStream config = new ByteArrayInputStream(pkcs11Config.getBytes(StandardCharsets.UTF_8));
Provider p = (Provider) c.newInstance(config);
Security.addProvider(p);
ks = KeyStore.getInstance("PKCS11", p);
pcb = new PasswordCallback("PKCS11 Password: ", false);
callbackHandler.handle(new Callback[] { pcb });
ks.load(null, pcb.getPassword());
} else if ("Apple".equals(keystoreType)) {
ks = KeyStore.getInstance("KeychainStore", "Apple");
ks.load(null, null);
// pcb = new PasswordCallback("Apple Keychain",false);
// pcb.setPassword(null);
} else if (keystoreType != null) {
ks = KeyStore.getInstance(keystoreType);
if (callbackHandler != null && StringUtils.isNotEmpty(keystorePath)) {
pcb = new PasswordCallback("Keystore Password: ", false);
callbackHandler.handle(new Callback[] { pcb });
ks.load(new FileInputStream(keystorePath), pcb.getPassword());
} else {
InputStream stream = TLSUtils.getDefaultTruststoreStreamIfPossible();
try {
// Note that PKCS12 keystores need a password one some Java platforms. Hence we try the famous
// 'changeit' here. See https://bugs.openjdk.java.net/browse/JDK-8194702
char[] password = "changeit".toCharArray();
try {
ks.load(stream, password);
} finally {
CloseableUtil.maybeClose(stream);
}
} catch (IOException e) {
LOGGER.log(Level.FINE, "KeyStore load() threw, attempting 'jks' fallback", e);
ks = KeyStore.getInstance("jks");
// Open the stream again, so that we read it from the beginning.
stream = TLSUtils.getDefaultTruststoreStreamIfPossible();
try {
ks.load(stream, null);
} finally {
CloseableUtil.maybeClose(stream);
}
}
}
}
if (ks != null) {
String keyManagerFactoryAlgorithm = KeyManagerFactory.getDefaultAlgorithm();
KeyManagerFactory kmf = KeyManagerFactory.getInstance(keyManagerFactoryAlgorithm);
if (kmf != null) {
if (pcb == null) {
kmf.init(ks, null);
} else {
kmf.init(ks, pcb.getPassword());
pcb.clearPassword();
}
kms = kmf.getKeyManagers();
}
}
SmackDaneVerifier daneVerifier = null;
if (dnssecMode == DnssecMode.needsDnssecAndDane) {
SmackDaneProvider daneProvider = DNSUtil.getDaneProvider();
if (daneProvider == null) {
throw new UnsupportedOperationException("DANE enabled but no SmackDaneProvider configured");
}
daneVerifier = daneProvider.newInstance();
if (daneVerifier == null) {
throw new IllegalStateException("DANE requested but DANE provider did not return a DANE verifier");
}
// User requested DANE verification.
daneVerifier.init(context, kms, trustManager, null);
} else {
final TrustManager[] trustManagers;
if (trustManager != null) {
trustManagers = new TrustManager[] { trustManager };
} else {
// Ensure trustManagers is null in case there was no explicit trust manager provided, so that the
// default one is used.
trustManagers = null;
}
context.init(kms, trustManagers, null);
}
return new SmackTlsContext(context, daneVerifier);
}
public DnsName getHost() {
return host;
}
public InetAddress getHostAddress() {
return hostAddress;
}
public UInt16 getPort() {
return port;
}
/**
* Returns the server name of the target server.
*
* @return the server name of the target server.
* @deprecated use {@link #getXMPPServiceDomain()} instead.
*/
@Deprecated
public DomainBareJid getServiceName() {
return xmppServiceDomain;
}
/**
* Returns the XMPP domain used by this configuration.
*
* @return the XMPP domain.
*/
public DomainBareJid getXMPPServiceDomain() {
return xmppServiceDomain;
}
/**
* Returns the XMPP service domain as DNS name if possible. Note that since not every XMPP address domainpart is a
* valid DNS name, this method may return <code>null</code>.
*
* @return the XMPP service domain as DNS name or <code>null</code>.
* @since 4.3.4
*/
public DnsName getXmppServiceDomainAsDnsNameIfPossible() {
return xmppServiceDomainDnsName;
}
/**
* Returns the TLS security mode used when making the connection. By default,
* the mode is {@link SecurityMode#required}.
*
* @return the security mode.
*/
public SecurityMode getSecurityMode() {
return securityMode;
}
public DnssecMode getDnssecMode() {
return dnssecMode;
}
/**
* Return the enabled SSL/TLS protocols.
*
* @return the enabled SSL/TLS protocols
*/
public String[] getEnabledSSLProtocols() {
return enabledSSLProtocols;
}
/**
* Return the enabled SSL/TLS ciphers.
*
* @return the enabled SSL/TLS ciphers
*/
public String[] getEnabledSSLCiphers() {
return enabledSSLCiphers;
}
/**
* Returns the configured HostnameVerifier of this ConnectionConfiguration or the Smack default
* HostnameVerifier configured with
* {@link SmackConfiguration#setDefaultHostnameVerifier(HostnameVerifier)}.
*
* @return a configured HostnameVerifier or <code>null</code>
*/
public HostnameVerifier getHostnameVerifier() {
if (hostnameVerifier != null)
return hostnameVerifier;
return SmackConfiguration.getDefaultHostnameVerifier();
}
/**
* Returns the Smack debugger factory.
*
* @return the Smack debugger factory or <code>null</code>
*/
public SmackDebuggerFactory getDebuggerFactory() {
return debuggerFactory;
}
/**
* Returns a CallbackHandler to obtain information, such as the password or
* principal information during the SASL authentication. A CallbackHandler
* will be used <b>ONLY</b> if no password was specified during the login while
* using SASL authentication.
*
* @return a CallbackHandler to obtain information, such as the password or
* principal information during the SASL authentication.
*/
public CallbackHandler getCallbackHandler() {
return callbackHandler;
}
/**
* Returns the socket factory used to create new xmppConnection sockets.
* This is useful when connecting through SOCKS5 proxies.
*
* @return socketFactory used to create new sockets.
*/
public SocketFactory getSocketFactory() {
return this.socketFactory;
}
/**
* Get the configured proxy information (if any).
*
* @return the configured proxy information or <code>null</code>.
*/
public ProxyInfo getProxyInfo() {
return proxy;
}
/**
* An enumeration for TLS security modes that are available when making a connection
* to the XMPP server.
*/
public enum SecurityMode {
/**
* Security via TLS encryption is required in order to connect. If the server
* does not offer TLS or if the TLS negotiation fails, the connection to the server
* will fail.
*/
required,
/**
* Security via TLS encryption is used whenever it's available. This is the
* default setting.
* <p>
* <b>Do not use this setting</b> unless you can't use {@link #required}. An attacker could easily perform a
* Man-in-the-middle attack and prevent TLS from being used, leaving you with an unencrypted (and
* unauthenticated) connection.
* </p>
*/
ifpossible,
/**
* Security via TLS encryption is disabled and only un-encrypted connections will
* be used. If only TLS encryption is available from the server, the connection
* will fail.
*/
disabled
}
/**
* Determines the requested DNSSEC security mode.
* <b>Note that Smack's support for DNSSEC/DANE is experimental!</b>
* <p>
* The default '{@link #disabled}' means that neither DNSSEC nor DANE verification will be performed. When
* '{@link #needsDnssec}' is used, then the connection will not be established if the resource records used to connect
* to the XMPP service are not authenticated by DNSSEC. Additionally, if '{@link #needsDnssecAndDane}' is used, then
* the XMPP service's TLS certificate is verified using DANE.
*
*/
public enum DnssecMode {
/**
* Do not perform any DNSSEC authentication or DANE verification.
*/
disabled,
/**
* <b>Experimental!</b>
* Require all DNS information to be authenticated by DNSSEC.
*/
needsDnssec,
/**
* <b>Experimental!</b>
* Require all DNS information to be authenticated by DNSSEC and require the XMPP service's TLS certificate to be verified using DANE.
*/
needsDnssecAndDane,
}
/**
* Returns the username to use when trying to reconnect to the server.
*
* @return the username to use when trying to reconnect to the server.
*/
public CharSequence getUsername() {
return this.username;
}
/**
* Returns the password to use when trying to reconnect to the server.
*
* @return the password to use when trying to reconnect to the server.
*/
public String getPassword() {
return this.password;
}
/**
* Returns the resource to use when trying to reconnect to the server.
*
* @return the resource to use when trying to reconnect to the server.
*/
public Resourcepart getResource() {
return resource;
}
/**
* Returns the stream language to use when connecting to the server.
*
* @return the stream language to use when connecting to the server.
*/
public Locale getLanguage() {
return language;
}
/**
* Returns the xml:lang string of the stream language to use when connecting to the server.
*
* <p>If the developer sets the language to null, this will also return null, leading to
* the removal of the xml:lang tag from the stream. If a Locale("") is configured, this will
* return "", which can be used as an override.</p>
*
* @return the stream language to use when connecting to the server.
*/
public String getXmlLang() {
// TODO: Change to Locale.toLanguageTag() once Smack's minimum Android API level is 21 or higher.
// This will need a workaround for new Locale("").getLanguageTag() returning "und". Expected
// behavior of this function:
// - returns null if language is null
// - returns "" if language.getLanguage() returns the empty string
// - returns language.toLanguageTag() otherwise
return language != null ? language.toString().replace("_", "-") : null;
}
/**
* Returns the optional XMPP address to be requested as the SASL authorization identity.
*
* @return the authorization identifier.
* @see <a href="http://tools.ietf.org/html/rfc6120#section-6.3.8">RFC 6120 § 6.3.8. Authorization Identity</a>
* @since 4.2
*/
public EntityBareJid getAuthzid() {
return authzid;
}
/**
* Returns true if an available presence should be sent when logging in while reconnecting.
*
* @return true if an available presence should be sent when logging in while reconnecting
*/
public boolean isSendPresence() {
return sendPresence;
}
/**
* Returns true if the connection is going to use stream compression. Stream compression
* will be requested after TLS was established (if TLS was enabled) and only if the server
* offered stream compression. With stream compression network traffic can be reduced
* up to 90%. By default compression is disabled.
*
* @return true if the connection is going to use stream compression.
*/
public boolean isCompressionEnabled() {
return compressionEnabled;
}
/**
* Check if the given SASL mechansism is enabled in this connection configuration.
*
* @param saslMechanism TODO javadoc me please
* @return true if the given SASL mechanism is enabled, false otherwise.
*/
public boolean isEnabledSaslMechanism(String saslMechanism) {
// If enabledSaslMechanisms is not set, then all mechanisms which are not blacklisted are enabled per default.
if (enabledSaslMechanisms == null) {
return !SASLAuthentication.getBlacklistedSASLMechanisms().contains(saslMechanism);
}
return enabledSaslMechanisms.contains(saslMechanism);
}
/**
* Return the explicitly enabled SASL mechanisms. May return <code>null</code> if no SASL mechanisms where
* explicitly enabled, i.e. all SALS mechanisms supported and announced by the service will be considered.
*
* @return the enabled SASL mechanisms or <code>null</code>.
*/
public Set<String> getEnabledSaslMechanisms() {
if (enabledSaslMechanisms == null) {
return null;
}
return Collections.unmodifiableSet(enabledSaslMechanisms);
}
StanzaIdSource constructStanzaIdSource() {
return stanzaIdSourceFactory.constructStanzaIdSource();
}
/**
* A builder for XMPP connection configurations.
* <p>
* This is an abstract class that uses the builder design pattern and the "getThis() trick" to recover the type of
* the builder in a class hierarchies with a self-referential generic supertype. Otherwise chaining of build
* instructions from the superclasses followed by build instructions of a subclass would not be possible, because
* the superclass build instructions would return the builder of the superclass and not the one of the subclass. You
* can read more about it a Angelika Langer's Generics FAQ, especially the entry <a
* href="http://www.angelikalanger.com/GenericsFAQ/FAQSections/ProgrammingIdioms.html#FAQ206">What is the
* "getThis()" trick?</a>.
* </p>
*
* @param <B> the builder type parameter.
* @param <C> the resulting connection configuration type parameter.
*/
public abstract static class Builder<B extends Builder<B, C>, C extends ConnectionConfiguration> {
private SecurityMode securityMode = SecurityMode.required;
private DnssecMode dnssecMode = DnssecMode.disabled;
private String keystorePath;
private String keystoreType;
private String pkcs11Library = "pkcs11.config";
private SslContextFactory sslContextFactory;
private String[] enabledSSLProtocols;
private String[] enabledSSLCiphers;
private HostnameVerifier hostnameVerifier;
private EntityBareJid authzid;
private CharSequence username;
private String password;
private Resourcepart resource;
private Locale language = Locale.getDefault();
private boolean sendPresence = true;
private ProxyInfo proxy;
private CallbackHandler callbackHandler;
private SmackDebuggerFactory debuggerFactory;
private SocketFactory socketFactory;
private DomainBareJid xmppServiceDomain;
private InetAddress hostAddress;
private DnsName host;
private UInt16 port = UInt16.from(5222);
private boolean allowEmptyOrNullUsername = false;
private boolean saslMechanismsSealed;
private Set<String> enabledSaslMechanisms;
private X509TrustManager customX509TrustManager;
private boolean compressionEnabled = false;
private StanzaIdSourceFactory stanzaIdSourceFactory = new StandardStanzaIdSource.Factory();
protected Builder() {
if (SmackConfiguration.DEBUG) {
enableDefaultDebugger();
}
}
/**
* Convenience method to configure the username, password and XMPP service domain.
*
* @param jid the XMPP address of the user.
* @param password the password of the user.
* @return a reference to this builder.
* @throws XmppStringprepException in case the XMPP address is not valid.
* @see #setXmppAddressAndPassword(EntityBareJid, String)
* @since 4.4.0
*/
public B setXmppAddressAndPassword(CharSequence jid, String password) throws XmppStringprepException {
return setXmppAddressAndPassword(JidCreate.entityBareFrom(jid), password);
}
/**
* Convenience method to configure the username, password and XMPP service domain. The localpart of the provided
* JID is used as username and the domanipart is used as XMPP service domain.
* <p>
* Please note that this does and can not configure the client XMPP address. XMPP services are not required to
* assign bound JIDs where the localpart matches the username and the domainpart matches the verified domainpart.
* Although most services will follow that pattern.
* </p>
*
* @param jid TODO javadoc me please
* @param password TODO javadoc me please
* @return a reference to this builder.
* @since 4.4.0
*/
public B setXmppAddressAndPassword(EntityBareJid jid, String password) {
setUsernameAndPassword(jid.getLocalpart(), password);
return setXmppDomain(jid.asDomainBareJid());
}
/**
* Set the XMPP entities username and password.
* <p>
* The username is usually the localpart of the clients JID. But some SASL mechanisms or services may require a different
* format (e.g. the full JID) as used authorization identity.
* </p>
*
* @param username the username or authorization identity
* @param password the password or token used to authenticate
* @return a reference to this builder.
*/
public B setUsernameAndPassword(CharSequence username, String password) {
this.username = username;
this.password = password;
return getThis();
}
/**
* Set the XMPP domain. The XMPP domain is what follows after the '@' sign in XMPP addresses (JIDs).
*
* @param serviceName the service name
* @return a reference to this builder.
* @deprecated use {@link #setXmppDomain(DomainBareJid)} instead.
*/
@Deprecated
public B setServiceName(DomainBareJid serviceName) {
return setXmppDomain(serviceName);
}
/**
* Set the XMPP domain. The XMPP domain is what follows after the '@' sign in XMPP addresses (JIDs).
*
* @param xmppDomain the XMPP domain.
* @return a reference to this builder.
*/
public B setXmppDomain(DomainBareJid xmppDomain) {
this.xmppServiceDomain = xmppDomain;
return getThis();
}
/**
* Set the XMPP domain. The XMPP domain is what follows after the '@' sign in XMPP addresses (JIDs).
*
* @param xmppServiceDomain the XMPP domain.
* @return a reference to this builder.
* @throws XmppStringprepException if the given string is not a domain bare JID.
*/
public B setXmppDomain(String xmppServiceDomain) throws XmppStringprepException {
this.xmppServiceDomain = JidCreate.domainBareFrom(xmppServiceDomain);
return getThis();
}
/**
* Set the resource we are requesting from the server.
* <p>
* If <code>resource</code> is <code>null</code>, the default, then the server will automatically create a
* resource for the client. Note that XMPP clients only suggest this resource to the server. XMPP servers are
* allowed to ignore the client suggested resource and instead assign a completely different
* resource (see RFC 6120 § 7.7.1).
* </p>
*
* @param resource the resource to use.
* @return a reference to this builder.
* @see <a href="https://tools.ietf.org/html/rfc6120#section-7.7.1">RFC 6120 § 7.7.1</a>
*/
public B setResource(Resourcepart resource) {
this.resource = resource;
return getThis();
}
/**
* Set the stream language.
*
* @param language the language to use.
* @return a reference to this builder.
* @see <a href="https://tools.ietf.org/html/rfc6120#section-4.7.4">RFC 6120 § 4.7.4</a>
* @see <a href="https://www.w3.org/TR/xml/#sec-lang-tag">XML 1.0 § 2.12 Language Identification</a>
*/
public B setLanguage(Locale language) {
this.language = language;
return getThis();
}
/**
* Set the resource we are requesting from the server.
*
* @param resource the non-null CharSequence to use a resource.
* @return a reference ot this builder.
* @throws XmppStringprepException if the CharSequence is not a valid resourcepart.
* @see #setResource(Resourcepart)
*/
public B setResource(CharSequence resource) throws XmppStringprepException {
Objects.requireNonNull(resource, "resource must not be null");
return setResource(Resourcepart.from(resource.toString()));
}
/**
* Set the Internet address of the host providing the XMPP service. If set, then this will overwrite anything
* set via {@link #setHost(CharSequence)}.
*
* @param address the Internet address of the host providing the XMPP service.
* @return a reference to this builder.
* @since 4.2
*/
public B setHostAddress(InetAddress address) {
this.hostAddress = address;
return getThis();
}
/**
* Set the name of the host providing the XMPP service. This method takes DNS names and
* IP addresses.
*
* @param host the DNS name of the host providing the XMPP service.
* @return a reference to this builder.
*/
public B setHost(CharSequence host) {
String fqdnOrIpString = host.toString();
if (InetAddressUtil.isIpAddress(fqdnOrIpString)) {
InetAddress hostInetAddress;
try {
hostInetAddress = InetAddress.getByName(fqdnOrIpString);
}
catch (UnknownHostException e) {
// Should never happen.
throw new AssertionError(e);
}
setHostAddress(hostInetAddress);
} else {
DnsName dnsName = DnsName.from(fqdnOrIpString);
setHost(dnsName);
}
return getThis();
}
/**
* Set the name of the host providing the XMPP service. Note that this method does only allow DNS names and not
* IP addresses. Use {@link #setHostAddress(InetAddress)} if you want to explicitly set the Internet address of
* the host providing the XMPP service.
*
* @param host the DNS name of the host providing the XMPP service.
* @return a reference to this builder.
*/
public B setHost(DnsName host) {
this.host = host;
return getThis();
}
/**
* Set the host to connect to by either its fully qualified domain name (FQDN) or its IP.
*
* @param fqdnOrIp a CharSequence either representing the FQDN or the IP of the host.
* @return a reference to this builder.
* @see #setHost(DnsName)
* @see #setHostAddress(InetAddress)
* @since 4.3.2
* @deprecated use {@link #setHost(CharSequence)} instead.
*/
@Deprecated
// TODO: Remove in Smack 4.5.
public B setHostAddressByNameOrIp(CharSequence fqdnOrIp) {
return setHost(fqdnOrIp);
}
public B setPort(int port) {
if (port < 0 || port > 65535) {
throw new IllegalArgumentException(
"Port must be a 16-bit unsigned integer (i.e. between 0-65535. Port was: " + port);
}
UInt16 portUint16 = UInt16.from(port);
return setPort(portUint16);
}
public B setPort(UInt16 port) {
this.port = Objects.requireNonNull(port);
return getThis();
}
/**
* Sets a CallbackHandler to obtain information, such as the password or
* principal information during the SASL authentication. A CallbackHandler
* will be used <b>ONLY</b> if no password was specified during the login while
* using SASL authentication.
*
* @param callbackHandler to obtain information, such as the password or
* principal information during the SASL authentication.
* @return a reference to this builder.
*/
public B setCallbackHandler(CallbackHandler callbackHandler) {
this.callbackHandler = callbackHandler;
return getThis();
}
public B setDnssecMode(DnssecMode dnssecMode) {
this.dnssecMode = Objects.requireNonNull(dnssecMode, "DNSSEC mode must not be null");
return getThis();
}
public B setCustomX509TrustManager(X509TrustManager x509TrustManager) {
this.customX509TrustManager = x509TrustManager;
return getThis();
}
/**
* Sets the TLS security mode used when making the connection. By default,
* the mode is {@link SecurityMode#required}.
*
* @param securityMode the security mode.
* @return a reference to this builder.
*/
public B setSecurityMode(SecurityMode securityMode) {
this.securityMode = securityMode;
return getThis();
}
/**
* Sets the path to the keystore file. The key store file contains the
* certificates that may be used to authenticate the client to the server,
* in the event the server requests or requires it.
*
* @param keystorePath the path to the keystore file.
* @return a reference to this builder.
*/
public B setKeystorePath(String keystorePath) {
this.keystorePath = keystorePath;
return getThis();
}
/**
* Sets the keystore type.
*
* @param keystoreType the keystore type.
* @return a reference to this builder.
*/
public B setKeystoreType(String keystoreType) {
this.keystoreType = keystoreType;
return getThis();
}
/**
* Sets the PKCS11 library file location, needed when the
* Keystore type is PKCS11.
*
* @param pkcs11Library the path to the PKCS11 library file.
* @return a reference to this builder.
*/
public B setPKCS11Library(String pkcs11Library) {
this.pkcs11Library = pkcs11Library;
return getThis();
}
/**
* Sets a custom SSLContext for creating SSL sockets.
* <p>
* For more information on how to create a SSLContext see <a href=
* "http://docs.oracle.com/javase/8/docs/technotes/guides/security/jsse/JSSERefGuide.html#X509TrustManager"
* >Java Secure Socket Extension (JSEE) Reference Guide: Creating Your Own X509TrustManager</a>
*
* @param context the custom SSLContext for new sockets.
* @return a reference to this builder.
* @deprecated use {@link #setSslContextFactory(SslContextFactory)} instead}.
*/
// TODO: Remove in Smack 4.5.
@Deprecated
public B setCustomSSLContext(SSLContext context) {
return setSslContextFactory(() -> {
return context;
});
}
/**
* Sets a custom SSLContext for creating SSL sockets.
* <p>
* For more information on how to create a SSLContext see <a href=
* "http://docs.oracle.com/javase/8/docs/technotes/guides/security/jsse/JSSERefGuide.html#X509TrustManager"
* >Java Secure Socket Extension (JSEE) Reference Guide: Creating Your Own X509TrustManager</a>
*
* @param sslContextFactory the custom SSLContext for new sockets.
* @return a reference to this builder.
*/
public B setSslContextFactory(SslContextFactory sslContextFactory) {
this.sslContextFactory = Objects.requireNonNull(sslContextFactory, "The provided SslContextFactory must not be null");
return getThis();
}
/**
* Set the enabled SSL/TLS protocols.
*
* @param enabledSSLProtocols TODO javadoc me please
* @return a reference to this builder.
*/
public B setEnabledSSLProtocols(String[] enabledSSLProtocols) {
this.enabledSSLProtocols = enabledSSLProtocols;
return getThis();
}
/**
* Set the enabled SSL/TLS ciphers.
*
* @param enabledSSLCiphers the enabled SSL/TLS ciphers
* @return a reference to this builder.
*/
public B setEnabledSSLCiphers(String[] enabledSSLCiphers) {
this.enabledSSLCiphers = enabledSSLCiphers;
return getThis();
}
/**
* Set the HostnameVerifier used to verify the hostname of SSLSockets used by XMPP connections
* created with this ConnectionConfiguration.
*
* @param verifier TODO javadoc me please
* @return a reference to this builder.
*/
public B setHostnameVerifier(HostnameVerifier verifier) {
hostnameVerifier = verifier;
return getThis();
}
/**
* Sets if an initial available presence will be sent to the server. By default
* an available presence will be sent to the server indicating that this presence
* is not online and available to receive messages. If you want to log in without
* being 'noticed' then pass a <code>false</code> value.
*
* @param sendPresence true if an initial available presence will be sent while logging in.
* @return a reference to this builder.
*/
public B setSendPresence(boolean sendPresence) {
this.sendPresence = sendPresence;
return getThis();
}
public B enableDefaultDebugger() {
this.debuggerFactory = SmackConfiguration.getDefaultSmackDebuggerFactory();
assert this.debuggerFactory != null;
return getThis();
}
/**
* Set the Smack debugger factory used to construct Smack debuggers.
*
* @param debuggerFactory the Smack debugger factory.
* @return a reference to this builder.
*/
public B setDebuggerFactory(SmackDebuggerFactory debuggerFactory) {
this.debuggerFactory = debuggerFactory;
return getThis();
}
/**
* Sets the socket factory used to create new xmppConnection sockets.
* This is useful when connecting through SOCKS5 proxies.
*
* @param socketFactory used to create new sockets.
* @return a reference to this builder.
*/
public B setSocketFactory(SocketFactory socketFactory) {
this.socketFactory = socketFactory;
return getThis();
}
/**
* Set the information about the Proxy used for the connection.
*
* @param proxyInfo the Proxy information.
* @return a reference to this builder.
*/
public B setProxyInfo(ProxyInfo proxyInfo) {
this.proxy = proxyInfo;
return getThis();
}
/**
* Allow <code>null</code> or the empty String as username.
*
* Some SASL mechanisms (e.g. SASL External) may also signal the username (as "authorization identity"), in
* which case Smack should not throw an IllegalArgumentException when the username is not set.
*
* @return a reference to this builder.
*/
public B allowEmptyOrNullUsernames() {
allowEmptyOrNullUsername = true;
return getThis();
}
/**
* Perform anonymous authentication using SASL ANONYMOUS. Your XMPP service must support this authentication
* mechanism. This method also calls {@link #addEnabledSaslMechanism(String)} with "ANONYMOUS" as argument.
*
* @return a reference to this builder.
*/
public B performSaslAnonymousAuthentication() {
if (!SASLAuthentication.isSaslMechanismRegistered(SASLAnonymous.NAME)) {
throw new IllegalArgumentException("SASL " + SASLAnonymous.NAME + " is not registered");
}
throwIfEnabledSaslMechanismsSet();
allowEmptyOrNullUsernames();
addEnabledSaslMechanism(SASLAnonymous.NAME);
saslMechanismsSealed = true;
return getThis();
}
/**
* Perform authentication using SASL EXTERNAL. Your XMPP service must support this
* authentication mechanism. This method also calls {@link #addEnabledSaslMechanism(String)} with "EXTERNAL" as
* argument. It also calls {@link #allowEmptyOrNullUsernames()} and {@link #setSecurityMode(ConnectionConfiguration.SecurityMode)} to
* {@link SecurityMode#required}.
*
* @param sslContext custom SSLContext to be used.
* @return a reference to this builder.
*/
public B performSaslExternalAuthentication(SSLContext sslContext) {
if (!SASLAuthentication.isSaslMechanismRegistered(SASLMechanism.EXTERNAL)) {
throw new IllegalArgumentException("SASL " + SASLMechanism.EXTERNAL + " is not registered");
}
setCustomSSLContext(sslContext);
throwIfEnabledSaslMechanismsSet();
allowEmptyOrNullUsernames();
setSecurityMode(SecurityMode.required);
addEnabledSaslMechanism(SASLMechanism.EXTERNAL);
saslMechanismsSealed = true;
return getThis();
}
private void throwIfEnabledSaslMechanismsSet() {
if (enabledSaslMechanisms != null) {
throw new IllegalStateException("Enabled SASL mechanisms found");
}
}
/**
* Add the given mechanism to the enabled ones. See {@link #addEnabledSaslMechanism(Collection)} for a discussion about enabled SASL mechanisms.
*
* @param saslMechanism the name of the mechanism to enable.
* @return a reference to this builder.
*/
public B addEnabledSaslMechanism(String saslMechanism) {
return addEnabledSaslMechanism(Arrays.asList(StringUtils.requireNotNullNorEmpty(saslMechanism,
"saslMechanism must not be null nor empty")));
}
/**
* Enable the given SASL mechanisms. If you never add a mechanism to the set of enabled ones, <b>all mechanisms
* known to Smack</b> will be enabled. Only explicitly enable particular SASL mechanisms if you want to limit
* the used mechanisms to the enabled ones.
*
* @param saslMechanisms a collection of names of mechanisms to enable.
* @return a reference to this builder.
*/
public B addEnabledSaslMechanism(Collection<String> saslMechanisms) {
if (saslMechanismsSealed) {
throw new IllegalStateException("The enabled SASL mechanisms are sealed, you can not add new ones");
}
CollectionUtil.requireNotEmpty(saslMechanisms, "saslMechanisms");
Set<String> blacklistedMechanisms = SASLAuthentication.getBlacklistedSASLMechanisms();
for (String mechanism : saslMechanisms) {
if (!SASLAuthentication.isSaslMechanismRegistered(mechanism)) {
throw new IllegalArgumentException("SASL " + mechanism + " is not available. Consider registering it with Smack");
}
if (blacklistedMechanisms.contains(mechanism)) {
throw new IllegalArgumentException("SALS " + mechanism + " is blacklisted.");
}
}
if (enabledSaslMechanisms == null) {
enabledSaslMechanisms = new HashSet<>(saslMechanisms.size());
}
enabledSaslMechanisms.addAll(saslMechanisms);
return getThis();
}
/**
* Set the XMPP address to be used as authorization identity.
* <p>
* In XMPP, authorization identities are bare jids. In general, callers should allow the server to select the
* authorization identifier automatically, and not call this. Note that setting the authzid does not set the XMPP
* service domain, which should typically match.
* Calling this will also SASL CRAM, since this mechanism does not support authzid.
* </p>
*
* @param authzid The BareJid to be requested as the authorization identifier.
* @return a reference to this builder.
* @see <a href="http://tools.ietf.org/html/rfc6120#section-6.3.8">RFC 6120 § 6.3.8. Authorization Identity</a>
* @since 4.2
*/
public B setAuthzid(EntityBareJid authzid) {
this.authzid = authzid;
return getThis();
}
/**
* Sets if the connection is going to use compression (default false).
*
* Compression is only activated if the server offers compression. With compression network
* traffic can be reduced up to 90%. By default compression is disabled.
*
* @param compressionEnabled if the connection is going to use compression on the HTTP level.
* @return a reference to this object.
*/
public B setCompressionEnabled(boolean compressionEnabled) {
this.compressionEnabled = compressionEnabled;
return getThis();
}
/**
* Set the factory for stanza ID sources to use.
*
* @param stanzaIdSourceFactory the factory for stanza ID sources to use.
* @return a reference to this builder.
* @since 4.4
*/
public B setStanzaIdSourceFactory(StanzaIdSourceFactory stanzaIdSourceFactory) {
this.stanzaIdSourceFactory = Objects.requireNonNull(stanzaIdSourceFactory);
return getThis();
}
public abstract C build();
protected abstract B getThis();
}
}