Class JingleManager
- All Implemented Interfaces:
JingleListener
,JingleSessionListener
To create a Jingle Session you need a Transport method and a Payload type.
A transport method is how it will transmit and receive network packets. Transport MUST have one or more candidates. A transport candidate is an IP Address with a defined port, that other party must send data to.
A supported payload type, is the data encoding format that the jmf will be transmitted. For instance an Audio Payload "GSM".
A Jingle session negotiates a payload type and a pair of transport candidates. Which means that when a Jingle Session is established you will have two defined transport candidates with addresses and a defined Payload type. In other words, you will have two IP address with their respective ports, and a Codec type defined.
The JingleManager is a facade built upon Jabber Jingle (XEP-166) to allow the use of Jingle. This implementation allows the user to simply use this class for setting the Jingle parameters, create and receive Jingle Sessions.
In order to use the Jingle, the user must provide a TransportManager that will handle the resolution of potential IP addresses that can be used to transport the streaming (jmf). This TransportManager can be initialized with several default resolvers, including a fixed solver that can be used when the address and port are know in advance. This API have ready to use Transport Managers, for instance: BasicTransportManager, STUNTransportManager, BridgedTransportManager.
You should also specify a JingleMediaManager if you want that JingleManager assume Media control Using a JingleMediaManager implementation is the easier way to implement a Jingle Application.
Otherwise before creating an outgoing connection, the user must create jingle session listeners that will be called when different events happen. The most important event is sessionEstablished(), that will be called when all the negotiations are finished, providing the payload type for the transmission as well as the remote and local addresses and ports for the communication. See JingleSessionListener for a complete list of events that can be observed.
This is an example of how to use the JingleManager: This example implements a Jingle VOIP Call between two users.To wait for an Incoming Jingle Session: try { // Connect to an XMPP Server XMPPConnection x1 = new XMPPTCPConnection("xmpp.com"); x1.connect(); x1.login("juliet", "juliet"); // Create a JingleManager using a BasicResolver final JingleManager jm1 = new JingleManager( x1, new BasicTransportManager()); // Create a JingleMediaManager. In this case using Jingle Audio Media API JingleMediaManager jingleMediaManager = new AudioMediaManager(); // Set the JingleMediaManager jm1.setMediaManager(jingleMediaManager); // Listen for incoming calls jm1.addJingleSessionRequestListener(new JingleSessionRequestListener() { public void sessionRequested(JingleSessionRequest request) { try { // Accept the call IncomingJingleSession session = request.accept(); // Start the call session.start(); } catch (XMPPException e) { LOGGER.log(Level.WARNING, "exception", e); } } }); Thread.sleep(15000); } catch (Exception e) { LOGGER.log(Level.WARNING, "exception", e); } To create an Outgoing Jingle Session: try { // Connect to an XMPP Server XMPPConnection x0 = new XMPPTCPConnection("xmpp.com"); x0.connect(); x0.login("romeo", "romeo"); // Create a JingleManager using a BasicResolver final JingleManager jm0 = new JingleManager( x0, new BasicTransportManager()); // Create a JingleMediaManager. In this case using Jingle Audio Media API JingleMediaManager jingleMediaManager = new AudioMediaManager(); // Using Jingle Media API // Set the JingleMediaManager jm0.setMediaManager(jingleMediaManager); // Create a new Jingle Call with a full JID OutgoingJingleSession js0 = jm0.createOutgoingJingleSession("juliet@xmpp.com/Smack"); // Start the call js0.start(); Thread.sleep(10000); js0.terminate(); Thread.sleep(3000); } catch (Exception e) { LOGGER.log(Level.WARNING, "exception", e); }
-
Constructor Summary
ConstructorDescriptionJingleManager
(XMPPConnection connection, List<JingleMediaManager> jingleMediaManagers) Default constructor with a defined XMPPConnection, Transport Resolver and a Media Manager. -
Method Summary
Modifier and TypeMethodDescriptionvoid
addCreationListener
(CreatedJingleSessionListener createdJingleSessionListener) Adds a CreatedJingleSessionListener.void
addJingleSessionRequestListener
(JingleSessionRequestListener jingleSessionRequestListener) Add a Jingle session request listenerJingle to listen to incoming session requests.When the session request is acceptable, this method should be invoked.createOutgoingJingleSession
(EntityFullJid responder) Creates an Jingle session to start a communication with another user.void
Disconnect all Jingle Sessions.Get the Media Managers of this Jingle Manager.getSession
(String jid) Get a session with the informed JID.static boolean
isServiceEnabled
(XMPPConnection connection) Returns true if the Jingle support is enabled for the given connection.static boolean
isServiceEnabled
(XMPPConnection connection, Jid userID) Returns true if the specified user handles Jingle messages.void
removeCreationListener
(CreatedJingleSessionListener createdJingleSessionListener) Removes a CreatedJingleSessionListener.void
removeJingleSessionRequestListener
(JingleSessionRequestListener jingleSessionRequestListener) Removes a Jingle session listenerJingle.void
sessionClosed
(String reason, JingleSession jingleSession) Notification that the session was closed normally.void
sessionClosedOnError
(XMPPException e, JingleSession jingleSession) Notification that the session was closed due to an exception.void
sessionDeclined
(String reason, JingleSession jingleSession) Notification that the session was declined.void
sessionEstablished
(PayloadType pt, TransportCandidate rc, TransportCandidate lc, JingleSession jingleSession) Notification that the session has been established.void
sessionMediaReceived
(JingleSession jingleSession, String participant) Notification that the Media has arrived for this session.void
sessionRedirected
(String redirection, JingleSession jingleSession) Notification that the session was redirected.static void
Setup the jingle system to let the remote clients know we support Jingle.void
setMediaManagers
(List<JingleMediaManager> jingleMediaManagers) Set the Media Managers of this Jingle Manager.static void
setServiceEnabled
(XMPPConnection connection, boolean enabled) Enables or disables the Jingle support on a given connection.void
triggerSessionCreated
(JingleSession jingleSession) Trigger CreatedJingleSessionListeners that a session was created.
-
Constructor Details
-
JingleManager
public JingleManager(XMPPConnection connection, List<JingleMediaManager> jingleMediaManagers) throws XMPPException, SmackException Default constructor with a defined XMPPConnection, Transport Resolver and a Media Manager. If a fully implemented JingleMediaSession is entered, JingleManager manage Jingle signalling and jmf- Parameters:
connection
- XMPP XMPPConnection to be usedjingleMediaManagers
- an implemented JingleMediaManager to be used.- Throws:
SmackException
- if Smack detected an exceptional situation.XMPPException
- if an XMPP protocol error was received.
-
-
Method Details
-
setJingleServiceEnabled
Setup the jingle system to let the remote clients know we support Jingle. (This used to be a static part of construction. The problem is a remote client might attempt a Jingle connection to us after we've created an XMPPConnection, but before we've setup an instance of a JingleManager. We will appear to not support Jingle. With the new method you just call it once and all new connections will report Jingle support.) -
setServiceEnabled
Enables or disables the Jingle support on a given connection.Before starting any Jingle jmf session, check that the user can handle it. Enable the Jingle support to indicate that this client handles Jingle messages.
- Parameters:
connection
- the connection where the service will be enabled or disabledenabled
- indicates if the service will be enabled or disabled
-
isServiceEnabled
Returns true if the Jingle support is enabled for the given connection.- Parameters:
connection
- the connection to look for Jingle support- Returns:
- a boolean indicating if the Jingle support is enabled for the given connection
-
isServiceEnabled
public static boolean isServiceEnabled(XMPPConnection connection, Jid userID) throws XMPPException, SmackException, InterruptedException Returns true if the specified user handles Jingle messages.- Parameters:
connection
- the connection to use to perform the service discoveryuserID
- the user to check. A fully qualified xmpp ID, e.g. jdoe@example.com- Returns:
- a boolean indicating whether the specified user handles Jingle messages
- Throws:
SmackException
- if there was no response from the server.XMPPException
- if an XMPP protocol error was received.InterruptedException
- if the calling thread was interrupted.
-
getMediaManagers
Get the Media Managers of this Jingle Manager.- Returns:
- the list of JingleMediaManagers
-
setMediaManagers
Set the Media Managers of this Jingle Manager.- Parameters:
jingleMediaManagers
- JingleMediaManager to be used for open, close, start and stop jmf streamings
-
addJingleSessionRequestListener
public void addJingleSessionRequestListener(JingleSessionRequestListener jingleSessionRequestListener) Add a Jingle session request listenerJingle to listen to incoming session requests.- Parameters:
jingleSessionRequestListener
- an implemented JingleSessionRequestListener- See Also:
-
removeJingleSessionRequestListener
public void removeJingleSessionRequestListener(JingleSessionRequestListener jingleSessionRequestListener) Removes a Jingle session listenerJingle.- Parameters:
jingleSessionRequestListener
- The jingle session jingleSessionRequestListener to be removed- See Also:
-
addCreationListener
Adds a CreatedJingleSessionListener. This listener will be called when a session is created by the JingleManager instance.- Parameters:
createdJingleSessionListener
- TODO javadoc me please
-
removeCreationListener
Removes a CreatedJingleSessionListener. This listener will be called when a session is created by the JingleManager instance.- Parameters:
createdJingleSessionListener
- TODO javadoc me please
-
triggerSessionCreated
Trigger CreatedJingleSessionListeners that a session was created.- Parameters:
jingleSession
- TODO javadoc me please
-
sessionEstablished
public void sessionEstablished(PayloadType pt, TransportCandidate rc, TransportCandidate lc, JingleSession jingleSession) Description copied from interface:JingleSessionListener
Notification that the session has been established. Arguments specify the payload type and transport to use.- Specified by:
sessionEstablished
in interfaceJingleSessionListener
- Parameters:
pt
- the Payload type to userc
- the remote candidate to use for connecting to the remote service.lc
- the local candidate where we must listen for connectionsjingleSession
- Session that called the method
-
sessionDeclined
Description copied from interface:JingleSessionListener
Notification that the session was declined.- Specified by:
sessionDeclined
in interfaceJingleSessionListener
- Parameters:
reason
- the reason (if any).jingleSession
- Session that called the method
-
sessionRedirected
Description copied from interface:JingleSessionListener
Notification that the session was redirected.- Specified by:
sessionRedirected
in interfaceJingleSessionListener
- Parameters:
redirection
- TODO javadoc me pleasejingleSession
- session that called the method
-
sessionClosed
Description copied from interface:JingleSessionListener
Notification that the session was closed normally.- Specified by:
sessionClosed
in interfaceJingleSessionListener
- Parameters:
reason
- the reason (if any).jingleSession
- Session that called the method
-
sessionClosedOnError
Description copied from interface:JingleSessionListener
Notification that the session was closed due to an exception.- Specified by:
sessionClosedOnError
in interfaceJingleSessionListener
- Parameters:
e
- the exception.jingleSession
- session that called the method
-
sessionMediaReceived
Description copied from interface:JingleSessionListener
Notification that the Media has arrived for this session.- Specified by:
sessionMediaReceived
in interfaceJingleSessionListener
- Parameters:
jingleSession
- session that called the methodparticipant
- description of the participant
-
disconnectAllSessions
Disconnect all Jingle Sessions. -
createOutgoingJingleSession
Creates an Jingle session to start a communication with another user.- Parameters:
responder
- the fully qualified jabber ID with resource of the other user.- Returns:
- The session on which the negotiation can be run.
- Throws:
XMPPException
- if an XMPP protocol error was received.
-
createIncomingJingleSession
When the session request is acceptable, this method should be invoked. It will create an JingleSession which allows the negotiation to proceed.- Parameters:
request
- the remote request that is being accepted.- Returns:
- the session which manages the rest of the negotiation.
- Throws:
XMPPException
- if an XMPP protocol error was received.
-
getSession
Get a session with the informed JID. If no session is found, return null.- Parameters:
jid
- TODO javadoc me please- Returns:
- the JingleSession
-