Openfire 3.9.3 Javadoc

org.jivesoftware.openfire
Interface RoutingTable

All Known Implementing Classes:
RoutingTableImpl

public interface RoutingTable

Maintains server-wide knowledge of routes to any node.

Routes are only concerned with node addresses. Destinations are packet handlers (typically of the three following types):

In almost all cases, the caller should not be concerned with what handler is associated with a given node. Simply obtain the packet handler and deliver the packet to the node, leaving the details up to the handler.

Routes are matched using the stringprep rules given in the XMPP specification. Wildcard routes for a particular name or resource is indicated by a null. E.g. routing to any address at server.com should set the name to null, the host to 'server.com' and the resource to null. A route to the best resource for user@server.com should indicate that route with a null resource component of the XMPPAddress. Session managers should add a route for both the generic user@server.com as well as user@server.com/resource routes (knowing that one is an alias for the other is the responsibility of the session or session manager).

In order to accomodate broadcasts, you can also do partial matches by querying all 'child' nodes of a particular node. The routing table contains a forest of node trees. The node tree is arranged in the following heirarchy:

Note: it is important that any component or action affecting routes update the routing table immediately.

Author:
Iain Shigeoka

Method Summary
 boolean addClientRoute(org.xmpp.packet.JID route, LocalClientSession destination)
          Adds a route to the routing table for the specified client session.
 void addComponentRoute(org.xmpp.packet.JID route, RoutableChannelHandler destination)
          Adds a route to the routing table for the specified internal or external component.
 void addServerRoute(org.xmpp.packet.JID route, LocalOutgoingServerSession destination)
          Adds a route to the routing table for the specified outoing server session.
 void broadcastPacket(org.xmpp.packet.Message packet, boolean onlyLocal)
          Broadcasts the specified message to connected client sessions to the local node or across the cluster.
 ClientSession getClientRoute(org.xmpp.packet.JID jid)
          Returns the client session associated to the specified XMPP address or null if none was found.
 Collection<ClientSession> getClientsRoutes(boolean onlyLocal)
          Returns collection of client sessions authenticated with the server.
 Collection<String> getComponentsDomains()
          Returns domains of components hosted by the server.
 RemotePacketRouter getRemotePacketRouter()
          Returns the RemotePacketRouter to use for deliverying packets to entities hosted in remote nodes of the cluster or null if none was set.
 List<org.xmpp.packet.JID> getRoutes(org.xmpp.packet.JID route, org.xmpp.packet.JID requester)
          Returns the list of routes associated to the specified route address.
 Collection<String> getServerHostnames()
          Returns a collection with the hostnames of the remote servers that currently may receive packets sent from this server.
 OutgoingServerSession getServerRoute(org.xmpp.packet.JID jid)
          Returns the outgoing server session associated to the specified XMPP address or null if none was found.
 int getServerSessionsCount()
          Returns the number of outgoing server sessions hosted in this JVM.
 boolean hasClientRoute(org.xmpp.packet.JID jid)
          Returns true if a registered user or anonymous user with the specified full JID is currently logged.
 boolean hasComponentRoute(org.xmpp.packet.JID jid)
          Returns true if an internal or external component is hosting the specified address.
 boolean hasServerRoute(org.xmpp.packet.JID jid)
          Returns true if an outgoing server session exists to the specified remote server.
 boolean isAnonymousRoute(org.xmpp.packet.JID jid)
          Returns true if an anonymous user with the specified full JID is currently logged.
 boolean isLocalRoute(org.xmpp.packet.JID jid)
          Returns true if the specified address belongs to a route that is hosted by this JVM.
 boolean removeClientRoute(org.xmpp.packet.JID route)
          Returns true if a route of a client session has been successfully removed.
 boolean removeComponentRoute(org.xmpp.packet.JID route)
          Returns true if a route of a component has been successfully removed.
 boolean removeServerRoute(org.xmpp.packet.JID route)
          Returns true if a route to an outoing server has been successfully removed.
 void routePacket(org.xmpp.packet.JID jid, org.xmpp.packet.Packet packet, boolean fromServer)
          Routes a packet to the specified address.
 void setRemotePacketRouter(RemotePacketRouter remotePacketRouter)
          Sets the RemotePacketRouter to use for deliverying packets to entities hosted in remote nodes of the cluster.
 

Method Detail

addServerRoute

void addServerRoute(org.xmpp.packet.JID route,
                    LocalOutgoingServerSession destination)
Adds a route to the routing table for the specified outoing server session. When running inside of a cluster this message must be sent from the cluster node that is actually holding the physical connectoin to the remote server.

Parameters:
route - the address associated to the route.
destination - the outgoing server session.

addComponentRoute

void addComponentRoute(org.xmpp.packet.JID route,
                       RoutableChannelHandler destination)
Adds a route to the routing table for the specified internal or external component.

When running inside of a cluster this message must be sent from the cluster node that is actually hosting the component. The component may be available in all or some of cluster nodes. The routing table will keep track of all nodes hosting the component.

Parameters:
route - the address associated to the route.
destination - the component.

addClientRoute

boolean addClientRoute(org.xmpp.packet.JID route,
                       LocalClientSession destination)
Adds a route to the routing table for the specified client session. The client session will be added as soon as the user has finished authenticating with the server. Moreover, when the user becomes available or unavailable then the routing table will get updated again. When running inside of a cluster this message must be sent from the cluster node that is actually holding the client session.

Parameters:
route - the address associated to the route.
destination - the client session.
Returns:
true if route was added to the table or false if already present.

routePacket

void routePacket(org.xmpp.packet.JID jid,
                 org.xmpp.packet.Packet packet,
                 boolean fromServer)
                 throws PacketException
Routes a packet to the specified address. The packet destination can be a user on the local server, a component, or a foreign server.

When routing a packet to a remote server then a new outgoing connection will be created to the remote server if none was found and the packet will be delivered. If an existing outgoing connection already exists then it will be used for delivering the packet. Moreover, when running inside of a cluster the node that has the actual outgoing connection will be requested to deliver the requested packet.

Packets routed to components will only be sent if the internal or external component is connected to the server. Moreover, when running inside of a cluster the node that is hosting the component will be requested to deliver the requested packet. It will be first checked if the component is available in this JVM and if not then the first cluster node found hosting the component will be used.

Packets routed to users will be delivered if the user is connected to the server. Depending on the packet type and the sender of the packet only available or all user sessions could be considered. For instance, Messages and Presences are only sent to available client sessions whilst IQs originated to the server can be sent to available or unavailable sessions. When running inside of a cluster the node that is hosting the user session will be requested to deliver the requested packet.

Parameters:
jid - the recipient of the packet to route.
packet - the packet to route.
fromServer - true if the packet was created by the server. This packets should always be delivered
Throws:
PacketException - thrown if the packet is malformed (results in the sender's session being shutdown).

hasClientRoute

boolean hasClientRoute(org.xmpp.packet.JID jid)
Returns true if a registered user or anonymous user with the specified full JID is currently logged. When running inside of a cluster a true value will be returned as long as the user is connected to any cluster node. // TODO Should we care about available or not available????

Parameters:
jid - the full JID of the user.
Returns:
true if a registered user or anonymous user with the specified full JID is currently logged.

isAnonymousRoute

boolean isAnonymousRoute(org.xmpp.packet.JID jid)
Returns true if an anonymous user with the specified full JID is currently logged. When running inside of a cluster a true value will be returned as long as the user is connected to any cluster node.

Parameters:
jid - the full JID of the anonymous user.
Returns:
true if an anonymous user with the specified full JID is currently logged.

isLocalRoute

boolean isLocalRoute(org.xmpp.packet.JID jid)
Returns true if the specified address belongs to a route that is hosted by this JVM. When running inside of a cluster each cluster node will host routes to local resources. A false value could either mean that the route is not hosted by this JVM but other cluster node or that there is no route to the specified address. Use XMPPServer.isLocal(org.xmpp.packet.JID) to figure out if the address belongs to tge domain hosted by this server.

Parameters:
jid - the address of the route.
Returns:
true if the specified address belongs to a route that is hosted by this JVM.

hasServerRoute

boolean hasServerRoute(org.xmpp.packet.JID jid)
Returns true if an outgoing server session exists to the specified remote server. The JID can be a full JID or a bare JID since only the domain of the specified address will be used to look up the route.

When running inside of a cluster the look up will be done in all the cluster. So as long as a node has a connection to the remote server a true value will be returned.

Parameters:
jid - JID that specifies the remote server address.
Returns:
true if an outgoing server session exists to the specified remote server.

hasComponentRoute

boolean hasComponentRoute(org.xmpp.packet.JID jid)
Returns true if an internal or external component is hosting the specified address. The JID can be a full JID or a bare JID since only the domain of the specified address will be used to look up the route.

When running inside of a cluster the look up will be done in all the cluster. So as long as a node is hosting the component a true value will be returned.

Parameters:
jid - JID that specifies the component address.
Returns:
true if an internal or external component is hosting the specified address.

getClientRoute

ClientSession getClientRoute(org.xmpp.packet.JID jid)
Returns the client session associated to the specified XMPP address or null if none was found. When running inside of a cluster and a remote node is hosting the client session then a session surrage will be returned.

Parameters:
jid - the address of the session.
Returns:
the client session associated to the specified XMPP address or null if none was found.

getClientsRoutes

Collection<ClientSession> getClientsRoutes(boolean onlyLocal)
Returns collection of client sessions authenticated with the server. When running inside of a cluster the returned sessions will include sessions connected to this JVM and also other cluster nodes. TODO Prevent usage of this message and change original requirement to avoid having to load all sessions. TODO This may not scale when hosting millions of sessions.

Parameters:
onlyLocal - true if only client sessions connected to this JVM must be considered.
Returns:
collection of client sessions authenticated with the server.

getServerRoute

OutgoingServerSession getServerRoute(org.xmpp.packet.JID jid)
Returns the outgoing server session associated to the specified XMPP address or null if none was found. When running inside of a cluster and a remote node is hosting the session then a session surrage will be returned.

Parameters:
jid - the address of the session.
Returns:
the outgoing server session associated to the specified XMPP address or null if none was found.

getServerHostnames

Collection<String> getServerHostnames()
Returns a collection with the hostnames of the remote servers that currently may receive packets sent from this server.

Returns:
a collection with the hostnames of the remote servers that currently may receive packets sent from this server.

getServerSessionsCount

int getServerSessionsCount()
Returns the number of outgoing server sessions hosted in this JVM. When runing inside of a cluster you will need to get this value for each cluster node to learn the total number of outgoing server sessions.

Returns:
the number of outgoing server sessions hosted in this JVM.

getComponentsDomains

Collection<String> getComponentsDomains()
Returns domains of components hosted by the server. When running in a cluster, domains of components running in any node will be returned.

Returns:
domains of components hosted by the server.

getRoutes

List<org.xmpp.packet.JID> getRoutes(org.xmpp.packet.JID route,
                                    org.xmpp.packet.JID requester)
Returns the list of routes associated to the specified route address. When asking for routes to a remote server then the requested JID will be included as the only value of the returned collection. It is indifferent if an outgoing session to the specified remote server exists or not.

When asking for routes to client sessions the specified route address could either be a full JID of a bare JID. In the case of a full JID, a single element will be included in the answer in case the specified full JID exists or an empty collection if the full JID does not exist. Moreover, when passing a bare JID a list of full JIDs will be returned for each available resource associated to the bare JID. In any case, only JIDs of available client sessions are returned. However, there is an exception with directed presences. Unavailable routes may be returned if and only if the owner of the route sent a directed presence to the requester thus becoming available to the requester. If requester is null then only available resources are considered.

When asking for routes to components a single element will be returned in the answer only if an internal or external component is found for the specified route address. If no component was found then an empty collection will be returned.

Parameters:
route - The address we want a route to.
requester - The address of the entity requesting the routes or null if we don't care about directed presences.
Returns:
list of routes associated to the specified route address.

removeClientRoute

boolean removeClientRoute(org.xmpp.packet.JID route)
Returns true if a route of a client session has been successfully removed. When running inside of a cluster this message must be sent from the cluster node that is actually hosting the client session.

Parameters:
route - the route to remove.
Returns:
true if a route of a client session has been successfully removed.

removeServerRoute

boolean removeServerRoute(org.xmpp.packet.JID route)
Returns true if a route to an outoing server has been successfully removed. When running inside of a cluster this message must be sent from the cluster node that is actually holding the physical connectoin to the remote server.

Parameters:
route - the route to remove.
Returns:
true if the route was successfully removed.

removeComponentRoute

boolean removeComponentRoute(org.xmpp.packet.JID route)
Returns true if a route of a component has been successfully removed. Both internal and external components have a route in the table. When running inside of a cluster this message must be sent from the cluster node that is actually hosting the component.

Parameters:
route - the route to remove.
Returns:
true if a route of a component has been successfully removed.

setRemotePacketRouter

void setRemotePacketRouter(RemotePacketRouter remotePacketRouter)
Sets the RemotePacketRouter to use for deliverying packets to entities hosted in remote nodes of the cluster.

Parameters:
remotePacketRouter - the RemotePacketRouter to use for deliverying packets to entities hosted in remote nodes of the cluster.

getRemotePacketRouter

RemotePacketRouter getRemotePacketRouter()
Returns the RemotePacketRouter to use for deliverying packets to entities hosted in remote nodes of the cluster or null if none was set.

Returns:
the RemotePacketRouter to use for deliverying packets to entities hosted in remote nodes of the cluster.

broadcastPacket

void broadcastPacket(org.xmpp.packet.Message packet,
                     boolean onlyLocal)
Broadcasts the specified message to connected client sessions to the local node or across the cluster. Both available and unavailable client sessions will receive the message.

Parameters:
packet - the message to broadcast.
onlyLocal - true if only client sessions connecte to the local JVM will get the message.

Openfire 3.9.3 Javadoc

Copyright © 2003-2008 Jive Software.